Canon 2535 All in One Printer User Manual


 
Cable Connection
1-10
Machine Installation
1
CAUTION
When connecting the interface cable or network cable, be sure to observe the
following precautions in order to avoid electrical shock:
- Turn OFF the main power switch before disconnecting the power cord from the
power outlet. (See “Turning OFF the Main Power,” on p. 2-4.)
- Turn OFF the computer and disconnect the power cord from the power outlet.
IMPORTANT
You cannot use the machine as a repeater, bridge, or gateway.
NOTE
The machine can automatically detect the Ethernet speed (10Base-T or 100Base-TX).
In a mixed 10Base-T/100Base-TX environment, devices on the network (hubs,
routers, etc.) must support the mixed environment. For more information, contact your
local authorized Canon dealer.
Computer with
a 100Base-TX
Connector
Computer with
a 10Base-T
Connector
LAN Cable
Hub
The LAN connector (RJ-45) is located
on the back side of the machine.