Canon 2535I All in One Printer User Manual


 
Routine Cleaning
5-12
Routine Maintenance
5
Routine Cleaning
If the original is not copied clearly, clean the following parts of the machine:
Platen glass
Underside of the feeder/platen cover
Feeder scanning area and rollers
For high-quality printouts, we recommend that you clean these parts regularly.
WARNING
When cleaning the machine, first turn OFF the main power switch and
disconnect the power cord. Failure to observe these steps may result in a fire or
electrical shock.
Disconnect the power cord from the power outlet regularly, and clean the area
around the base of the power plug’s metal pins and the power outlet with a dry
cloth to ensure that all dust and grime is removed. If the power cord is
connected for a long period of time in a damp, dusty, or smoky location, dust
can build up around the power plug and become damp. This may cause a short
circuit and result in a fire.
IMPORTANT
Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so
may damage the plastic parts.
Do not dampen the cloth too much, as excess water may damage the machine.
Turning the main power OFF will erase all jobs in the machine’s memory.
Platen Glass and Cover
Clean the platen glass and the underside of the feeder/platen cover as described
below.
IMPORTANT
If the platen glass or the underside of the feeder/platen cover is dirty, the original may
not be scanned clearly, or the size of the original may be incorrectly detected.