Filter
Top Products
11-2
Appendix
Machine Specifications
Machine Specifications
Type Personal Desktop
Power Supply
120 to 127 V, 60 Hz (Power requirements can
vary by country. They depend on where you
purchased the product.)
Power Consumption
• Maximum: 1,100 W or less
• Average consumption during standby mode:
Approx. 9 W
• Average consumption during sleep mode:
Approx. 2.3 W
Warm-up Time
11 seconds or less*
(Temperature: 68 °F (20 °C), humidity: 65%
RH ; from when the machine is turned ON
using the main power switch to when the
standby screen is displayed)
* Warm-up time may vary depending
on the conditions of the installation
environment.
Weight
• D1370/D1350
Main unit (the toner cartridge included):
Approx. 47.2 lb (21.4 kg)
• D1320
Main unit (the toner cartridge included):
Approx. 46.7 lb (21.2 kg)
Dimensions
(W x L x H)
• In the normal state
17 3/4” x 18 5/8” x 18 3/8”
(450 mm x 472 mm x 465 mm)
• When the optional drawer is installed
17 3/4” x 18 5/8” x 23 3/4”
(450 mm x 472 mm x 603 mm)
Installation Space
(W x L x H)
• In the normal state
25 5/8” x 52 7/8” x 32 1/2”
(650 mm x 1,341 mm x 824 mm)
• When the optional drawer is installed
25 5/8” x 52 7/8” x 37 7/8”
(650 mm x 1,341 mm x 962 mm)
Environmental
Conditions
Temperature: 50 to 86°F (10 to 30°C)
Humidity: 20% to 80% RH (no condensation)
Acceptable Documents
See “Supported Document Types” (→P. 2-2)
Acceptable Paper Stock
See “Supported Paper Types” (→P. 2-6)
Printable Area
See “Printable Area” (→P. 2-8)
Scan Area
See “Scan Area” (→P. 2-2)
Copy Specifications
Copy Specifications
Scan Resolution
• Text/Photo: 300 dpi x 600 dpi
• Text/Photo (Quality), Photo, Text: 600 dpi
x 600 dpi
Output Resolution 600 dpi x 600 dpi
Copy Ratio
• Direct 1:1 ± 1.0 %
• Enlargement 1:4.00, 1:2.00, 1:1.29
• Reduction 1:0.78, 1:0.64, 1:0.50, 1:0.25
• Zoom 0.25 to 4.00, 1% increments
Copy Speed (Letter
Plain Direct)*
35 cpm
Continuous Copying
Capacity
Maximum 99 copies
First Copy Time
(Letter)
8 seconds or less
* The copy speed on Letter size plain paper on one-side printing
is measured during continuous copying. Copy speeds vary
depending on the paper type and size, as well as the paper feeding
direction. Copy speeds on smaller paper sizes may be slower.
Plus, the machine may experience downtime or decrease the
copy speed in the middle of a continuous copy run to adjust the
temperature inside the machine or maintain the optimal print
quality.
Printer Specification
Printer Specification
Printing Method
Indirect electrostatic system (On-demand
fixing)
Paper Capacity
Multi-purpose tray: Approx. 50 sheets (16 to
23 lb Bond (60 to 89 g/m²))
Paper drawer: Approx. 500 sheets (16 to 23
lb Bond (60 to 89 g/m²))
Cassette Feeding Unit-U1 (Optional):
Approx. 500 sheets (16 to 23 lb Bond (60 to
89 g/m²))
Output Tray Capacity
(a fresh stack of
Letter size paper)
Output tray: Approx. 150 sheets (20 lb Bond
(75 g/m²))*
1
Sub Output tray: 1 sheet
Print Speed (Letter
Plain Direct)*
2
35 ppm
First Print Time
(Letter)
6 seconds or less*
3
Output Resolution Equivalent to 1200dpi x 600dpi
Gradation 256 gradations
Toner Cartridge
See “Replacing the Toner Cartridge” (→P. 8-8)
* 1
The actual paper capacity varies depending on the installation
environment and paper type used.
* 2
The print speed on Letter size plain paper on one-side printing is
measured during continuous printing. Print speeds vary depending
on the paper type and size, as well as the paper feeding direction.
Print speeds on smaller paper sizes may be slower. Plus, the
machine may experience downtime or decrease the print speed
in the middle of a continuous print run to adjust the temperature
inside the machine or maintain the optimal print quality.
* 3
May vary depending on the output environment.
Main Specifications