Filter
Top Products
Saddle Finisher-V2
100-sheet stapling
Finisher-V1
Two- or three-hole punching
FINISHER-V1/SADDLE FINISHER-V2 WITH OPTIONAL
PUNCHING, FOLDING, AND TRIMMING
Corner or double staple sets of up to 100 letter-sized pages
(50-sheet stapling for letter-R, legal, and ledger sets) and
stackup to 5,000 sheets with the optional Finisher-V1 or
Saddle Finisher-V2.
Both Finishers provide an upper 3,000-sheet offset tray and
a lower 2,000-sheet offset tray for non-stop collating with
cascade loading and may be equipped with precision two-
and three-hole punching through the internal Puncher Unit-V1
option (not shown).The optional Document Insertion Unit-C1
can be installed on top of either Finisher to enable the feeding
of heavyweight or pre-printed covers. Like the Document
Insertion Unit found on the Perfect Binder-A1, it offers dual
200-sheet trays to collate covers into job streams after fusing
to preserve the image quality of pre-printed pages. And, either
Finisher may be configured with the optional Paper Folding
Unit-D1 to Z-fold 11" x 17" pull-out pages, such as financial
spreadsheets or large graphic illustrations, into document
sets with a finished 8-1/2" x 11" size.
The Saddle Finisher-V2 matches all the specifications of
the Finisher-V1 and adds booklet-making capabilities (up
to 80 imaged pages). For even greater productivity, add the
Booklet Trimmer-C1.This option attaches to the Saddle
Finisher-V2 to trim the open end of booklet sets for a flush,
professional edge. After trimming, the booklets are delivered
to an output tray via a conveyor belt for easy retrieval.