Filter
Top Products
Try Scanning
9
Try Scanning
This section explains the basic scanning procedures using MP Navigator EX.
1 Open the document cover to make sure the
protective sheet is put on.
2 Place a color photo document with the side
to be scanned facing down on the platen
glass at least 1 cm (0.4 in.) away from the
edges of the platen glass, and then close
the document cover.
3 Start MP Navigator EX.
For Windows: Double-click the Canon Solution
Menu icon, then click Scan/import photos or
documents.
For Macintosh: Click the Solution Menu icon in
the Dock, then click Scan/import photos or
documents.
4 Click Photos/Documents (Platen)
(*1)
.
5 Select Color Photo in Document Type.
6 Click Scan to start scanning.
7 When prompted that the scanning completed, click Exit.
8 Click Save to save the image and close MP
Navigator EX
(*2)
.
• Do not move the scanner while it is
operating.
• Do not see the light source directly during a
scan job.
• For more information on scanning using MP Navigator EX, bundled applications, and troubleshooting, see "On-
Screen Manual". To open "On-Screen Manual", double-click the on-screen manual icon on the desktop, or click
on in ScanGear or MP Navigator EX.
Bottom
Top
protective
sheet
*1
*2