Filter
Top Products
Put CISS on the right side of the printer. In the meantime, place all the tubes at correct position. Then pull out
the small rubber plug and insert the air filters into air holes as the above pictures shown.
2) Install chips
、
Carefully remove the original chips from original cartridges as the above pictures. Pay more attention to the
chips when you do this procedure, make sure that the chips are not damaged.
Put some glue on the socket of system’s cartridge. Then stick original chips into the socket according to the
color of cartridges. Please make sure that the chips No matches with cartridge No.
3) Install cartridges
Stick the Support arm on the proper position as the above picture shown. Then place the CIS cartridges into
printer. Please press the cartridge and make sure that every cartridge is well installed according to the color
label.