Filter
Top Products
Windows
Macintosh
5 Windows
®
Printer Driver Installation 5 Macintosh
®
Printer Driver Installation
The screens below refer to Windows XP Service Pack 2
installation. Screens may differ depending on the operating
system you are using.
1
TURN THE PRINTER OFF.
You hear the operation sound until the printer is turned off.
It may take about 20 seconds.
2
Turn the computer on and start Windows.
NOTE:
•
Before installing the driver, disable all anti-virus programs
and automatically loading programs.
•
For Windows XP or Windows 2000, log on to Windows as a
member of Administrators group before continuing.
IMPORTANT: If you see the Found New Hardware Wizard,
click Cancel. Next, remove the USB cable connected to your
computer. Then proceed from step 3 to install the printer
driver.
3
Insert the Setup CD-ROM.
The setup program should run automatically.
4
When the main menu screen appears, click Easy Install and
follow the on-screen instructions.
NOTE:
•
Select Easy Install in order to install application software,
on-screen manual, utility and printer drivers. Select Custom
Install in order to choose the options you would like to
install.
•
To install PhotoRecord or Adobe
®
RGB (1998), click Custom
Install and follow the instruction on the screen.
•
Adobe RGB (1998) cannot be installed in Windows Me and
Windows 98.
5
When the Easy Install screen appears, click Install.
NOTE: Move the cursor over items to display explanations of
each application below.
6
Read the License Agreement, then click Yes.
Follow the on-screen instructions to install the software.
If the message asking for your confirmation to restart your
computer appears, click OK. The system is restarted automatically.
7
When the Printer Connection screen appears, connect the USB
cable to the computer and the other end to the printer.
8
TURN THE PRINTER ON.
IMPORTANT: If you cannot proceed to the next procedure after
two minutes, refer to "Troubleshooting" instructions
in the Quick Start Guide.
If the message asking for your confirmation to restart your
computer appears, click OK.
The system is restarted automatically.
9
Follow the on-screen instructions to install the remaining
software. When the Installation Results screen appears, click
Next.
10
Follow the on-screen instructions to register your product.
If the message asking for your confirmation to restart your
computer appears, click OK.
The system is restarted automatically.
11
When the Installation completed successfully screen appears,
click Exit.
If Restart is displayed, ensure the Restart the system now
(recommended) check box is selected, then click Restart.
7
When the Easy Install screen appears, click Install.
NOTE: Move the cursor over items to display explanations of
each application bellow.
8
Read the License Agreement, then click Yes. Follow the
on-screen instructions to install the software.
9
Follow the on-screen instructions to register your product.
10
When the Installation completed successfully screen
appears, click
Restart.
11
After restarting the computer, select Applications from the
Go menu.
Double-click the Utilities folder, and then double-click the
Printer Setup Utility (Print Center when you use Mac OS X
v.10.2.8) icon. Check that your printer name is displayed on
the Printer List. If your printer name is not displayed on the
Printer List, click Add to add the printer.
For details, refer to the Printer Setup Utility Help or Mac
Help.
NOTE:
•
Before installing the driver, disable all anti-virus programs and
automatically loading programs.
•
Use Mac
®
OS X v.10.2.8 to 10.4.x.
•
The screens below refer to Mac OS X v.10.4.x installation.
Screens may differ depending on the operating system you are
using.
•
Do not remove or insert the USB cable during installation, as this
may result in the computer or printer not operating normally.
1
Connect the end of the USB cable to the computer, the other to
the printer.
2
Turn on the computer and start Mac OS X.
3
Insert the Setup CD-ROM.
NOTE:
•
If the CD-ROM folder does not open automatically,
double-click the CD-ROM icon on the desktop.
•
Log on as an Administrator before continuing.
4
Double-click the Setup icon.
5
When the Authenticate screen appears, enter your
administrator name and password. Click OK.
If you do not know your administrator name or password, click
on the lower-left corner of the screen, then follow the on-screen
instructions.
6
When the main menu screen appears, click Easy Install and
follow on-screen instructions.
NOTE: Select Easy Install in order to install application software,
on-screen manual, utility and printer drivers. Select
Custom Install in order to choose the options you would
like to install.
Part no. QT5-0324-V02 ©2006 CANON INC. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
"Adobe" and "Adobe RGB(1998)"are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Specifications subject to change without notice. Printed in Thailand.