Filter
Top Products
29
Connecting a Power Source and the Camera to
the Printer
Connect the camera to the printer using the cable (included with the camera)
and turn the printer’s power on.
For more detailed camera connection instructions, refer to your Camera User
Guide or Direct Print User Guide.
* Canon cameras compatible with CP400, and non-Canon cameras compatible with
PictBridge can also be connected.
The numbered steps in the following instructions refer to the numbers in the above
illustration.
1
Place the printer on a flat area.
• Be sure to leave about 15 cm (6 in.) of clearance around the paper-handling slot
(at the rear) so that paper has sufficient room to jut out from the slot during
printing.
2
Connect the supplied power cord to the supplied Compact
Power Adapter CA-CP200.
3
Insert the plug in a power outlet.
1
2
3
4
5
6
To DIGITAL terminal
Camera*
To DC IN terminal
Camera’s Compact Power
Adapter (sold separately or
included with the camera)
• Please use the camera’s
compact power adapter or a
fully charged battery pack (or
charged batteries).
To power
outlet
Interface cable
included with
the camera
To power outlet
Compact power
adapter
15 cm (6 in.) at the
front and back of the
devices and 10 cm
(4 in.) on both sides or
more of open space