Filter
Top Products
Chapter 8 Receiving Faxes 8-5
Receiving Faxes
Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode
Set this mode if you only have one telephone line for fax and telephone use and want
your FAX to automatically switch between fax and voice calls.
n
For this mode, you need to connect the optional handset or a telephone to your FAX
(1 p. 2-6).
Setting Fax/Tel Mode
Follow this procedure to set the receive mode to FAX/TEL AUTO SW
(Fax/Tel Mode):
1 Open the one-touch speed dial panel.
2 Press Data Registration.
3 Press Set.
4 Use ∂ or ¨ to select RX SETTINGS.
5 Press Set.
6 Use ∂ or ¨ to select RX MODE.
7 Press Set.
Ex:
8 Use ∂ or ¨ to select FAX/TEL
AUTO SW.
9 Press Set.
• To set the options for FAX/TEL AUTO
SW (Fax/Tel Mode), see the following
pages.
10 Press Stop to return to standby mode.
Ex:
11 Confirm that FaxTel is displayed in
Ex:
the LCD.
• If FaxTel is not displayed, press Receive
Mode to select Fax/Tel Mode. After a
few seconds, the LCD returns to
standby mode.
15:00 FaxTel
15:00 FaxTel
RING START TIME
FAX/TEL AUTO SW
FAX ONLY MODE
RX MODE
ECM RX
RX SETTINGS
USER SETTINGS
DATA REGSTRATION