Filter
Top Products
4.Put glue at the same position 5.Stick the chips on the CISS 6. Repeat this with other
of the CISS cartridge (at the cartridge (Pls note that the cartridges.
2 sides) color should be correct. Do
Not misuse the chips).
Step 3: Install Cartridges
1.Fix the support arm on the printer. 2. Put the cartridges in the printer carriage.
Step 4: Fix the Tube
1. Fix the tube on the support arm 2. The installation is finished.
with the tube clip.
Step 5: Adjust the Tube
1. Adjust the length of the tube, 2.Leave enough length for the 3. Make sure that the rube will not
and move the printer carriage. tube so that the carriage can make trouble to the carriage
reach the fastest place. moving during working.