Filter
Top Products
Main Power and Control Panel Power
1-21
Before You Start Using This Machine
1
IMPORTANT
If the main power indicator on the control panel does not light even though the main power switch is ON,
be sure to check the breaker to see if it is OFF. (See "When the Power Does Not Turn ON," in the
Reference Guide.)
4
The screens on the right are displayed
while the system software is loading.
● If login authentication by a login service (SDL
(Simple Device Login) or SSO (Single
Sign-on)) is not set, and an application other
than MEAP is selected as the initial function in
Common Settings (from the Additional Func-
tions screen):
❑
The Start Up screen is displayed until the machine is
ready to scan.
❑ The screen on the right is displayed when the
machine is ready to scan.
The machine is ready to scan in approximately 45
seconds (at a room temperature of 20°C) after the screen above appears.