Filter
Top Products
Receiving Faxes Automatically: FAX ONLY MODE (8-3)
If you have a separate telephone line for fax use only, connect your FAX to
this line and set FAX ONLY MODE. Your FAX will answer all calls as fax
calls.
Setting FAX ONLY MODE
1 Press Receive Mode to select FAX
ONLY MODE.
❏ After a few seconds, the LCD
changes to this display:
If FAX ONLY MODE does not appear in the LCD when you press Receive
Mode, follow this procedure to set this mode:
1 Open the one-touch speed dial panel.
2 Press Data Registration.
3 Press Set.
4 Use . or . to select RX
SETTINGS.
5 Press Set.
6 Use . or . to select RX MODE.
7 Press Set.
8 Use . or . to select FAX ONLY
MODE.
9 Press Set.
10 Press Stop to return to standby
mode.
11 Confirm that FaxOnly is displayed
in the LCD.
❏ If FaxOnly is not displayed,
press Receive Mode to select FAX
ONLY MODE. After a few
seconds, the LCD returns to
standby mode.
FAX ONLY MODE
15:00
Ex:
FaxOnly
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
FAX/TEL AUTO SW
Ex:
FAX ONLY MODE
INCOMING RING
15:00
Ex:
FaxOnly
15:00
Ex:
FaxOnly
14 The numbers in parentheses indicate the pages in the FAX-L280/L200 User’s Guide on which you can find
detailed information.