Filter
Top Products
Receiving Both Faxes and Telephone Calls Automatically:
Fax/Tel Mode (8-5)
Set this mode if you only have one telephone line for fax and telephone use
and want your FAX to automatically switch between fax and voice calls.
For this mode, you need to connect the optional handset or a telephone to
your FAX (→ p. 2-6).
Setting Up Fax/Tel Mode
Follow this procedure to set the receive mode to FAX/TEL AUTO SW
(Fax/Tel Mode):
1 Open the one-touch speed dial panel.
2 Press Data Registration.
3 Press Set.
4 Use . or . to select RX
SETTINGS.
5 Press Set.
6 Use . or . to select RX MODE.
7 Press Set.
8 Use . or . to select FAX/TEL
AUTO SW.
9 Press Set.
❏ To set the options for FAX/TEL
AUTO SW (Fax/Tel Mode), see
the following pages.
10 Press Stop to return to standby
mode.
11 Confirm that FaxTel is displayed in
the LCD.
❏ If FaxTel is not displayed, press
Receive Mode to select Fax/Tel
Mode. After a few seconds, the
LCD returns to standby mode.
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
FAX ONLY MODE
Ex:
FAX/TEL AUTO SW
RING START TIME
15:00
Ex:
FaxTel
15:00
Ex:
FaxTel
15The numbers in parentheses indicate the pages in the FAX-L280/L200 User’s Guide on which you can find
detailed information.