Canon LV-8235 UST Projector User Manual


 
14
Chapter 2 Setup Procedures
The Network PIN code is to restrict the access to the projector through the network.
After setting the Network PIN code, you need to enter it to operate the projector via the
networks.
Network PIN code
Network information
1. Select "Network PIN code" in the Network menu, and press OK button.
The Network PIN code screen will appear.
2. Set the Network PIN code.
Set the figures with the Point ed buttons and move to the next items with the Point 7
8 buttons. Select “Set” and press OK button to set. To cancel the preset Network PIN code,
select “Cancel”. When you do not want to set the Network PIN code, set "0000".
It is recommended to set the Network PIN code if you use the projector via the networks.
The Network PIN code can be set also through the networks. See “3. Basic setting and
operation” “Initial setting” “Network PIN code setting” (p.23).
Select "Network information" in the Network menu and press Point 8 or OK button to
show LAN setting environment of the currently selected projector. (The description below
is an example and different from what will be shown.)
Network PIN code
Network PIN code screen
* The numerical value is a setting example.