Filter
Top Products
3.3.8 Handling the purge unit
Note the following with regard to the purge unit:
(1) Grease soiling the blade
Due to the blade's height, the carriage guide shaft may touch it when the shaft is
removed or installed. Grease may soil the blade as a result.
You must not allow any grease or oily substance to adhere to the blade.
(2) Replacing the blade cleaner
When replacing the purge unit, also replace the blade cleaner at the same time.
Since it is soiled by ink, the blade cleaner needs to be replaced.
The spare part for this replacement includes both the purge unit and blade cleaner
in one set.
2-19
S600
Part 2: Troubleshooting
Troubleshooting
Blade
Blade Cleaner
Figure 2-9 Handling the Purge Unit