Filter
Top Products
Note: - If the Stop/Reset button is pressed 14 or more times, the Alarm LED (orange) or Power LED (green) lights steadily without
any changes.
<Destination settings procedures>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed in the
table below, and press the ON/OFF button.
Note: Confirm the model name and destination in service test print or EEPROM information print.
<Ink absorber counter resetting procedures>
After replacement of the ink absorber, reset the applicable ink absorber counter.
1) Before replacement of the ink absorber, check the ink absorber counter value in EEPROM information print. See 3-4. Verification
Items, (2) EEPROM information print.
2) In the ink absorber counter resetting mode, press the Stop/Reset button the specified number of time(s) according to the replaced ink
absorber to set its counter to 0%, or 60% (for partial replacement).
See "Destination settings procedures" below.
6 times Green (Power)
Print head deep cleaning
Cleaning of both Black and Color
7 to 9 times Orange at odd
numbers (Alarm)
Green at even
numbers (Power)
Return to the menu selection
10 times Green (Power)
Eject roller correction
Not used in servicing.
11 times Orange (Alarm)
Return to the menu selection
12 times Green (Power)
Button and LCD test See "Button and LCD test procedures" below.
13 times
Orange (Alarm) Ink absorber counter setting See "Ink absorber counter setting procedures" below.
14 times or
more
Green (Power)
Return to the menu selection
Time(s) LED indication Destination
0 times Green (Power)
No change of the destination
1 time Orange (Alarm)
Japan
2 times Green (Power)
Korea
3 times Orange (Alarm)
US
4 times Green (Power)
Europe
5 times Orange (Alarm)
Australia
6 times Green (Power)
Asia
7 times Orange (Alarm)
China
8 times Green (Power)
Taiwan
9 times or more Orange (Alarm)
Return to the menu selection
Time(s) Replaced ink absorber Counter value
0 times
Main ink absorber Reset to 0%
1 time
Borderless-print ink absorber
Reset to 0%
2 times
Both the main and borderless-print ink absorbers
Reset to 0%
3 times
A half portion of the main ink absorber (partial replacement)
Set to 60%
1-28