Carrier Access 3750 Series Switch User Manual


 
Cisco Systems, Inc.
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 11 of 18
Connectors and
cabling
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP)
cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45, 2-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-SX, -LX/LH, -ZX, and CWDM* SFP-based ports: LC fiber connectors
(single-mode, or multimode fiber)
Cisco StackWise stacking ports: copper-based Cisco StackWise cabling
Management console port: RJ-45-to-DB9 cable for PC connections
Power connectors Customers can provide power to a switch by using either the internal power supply or the
Cisco RPS 675. The connectors are located at the back of the switch.
Internal Power Supply Connector
The internal power supply is an auto-ranging unit.
The internal power supply supports input voltages between 100 and 240 volts alternating
current (VAC).
Use the supplied alternating-current (AC) power cord to connect the AC power connector to
an AC power outlet.
Cisco RPS Connector
The connector offers connection for an optional Cisco RPS 675 that uses AC input and
supplies direct-current (DC) output to the switch.
The connector offersa 675-watt (W) RPS that supports up to 6 external network devicesand
provides power to 1 failed device at a time.
The connector automatically senses when the internal power supply of a connected device
fails and provides power to the failed device, preventing loss of network traffic.
Only the Cisco RPS 675 (model PWR675-AC-RPS-N1=) should be attached to the
redundant-power-supply receptacle.
Indicators Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications
System-status LEDs: system, RPS, and bandwidth-utilization indications
Dimensions 2.59 x 17.5 x 11.6 inches (in.) (6.59 x 44.5 x 29.5 centimeters [cm]) (Cisco Catalyst
3750G-24TS)
1.73 x 17.5 x 12.83 in (4.39 x 44.5 x 32.6 cm) (Cisco Catalyst 3750G-24T)
1.73 x 17.5 x 12.83 (4.39 x 44.5 x 32.6 cm) (Cisco Catalyst 3750G-12S)
1.73 x 17.5 x 11.83 in. (4.39 x 44.5 x 30.1 cm) (Cisco Catalyst 3750-48TS)
1.73 x 17.5 x 11.83 in. (4.39 x 44.5 x 30.1 cm) (Cisco Catalyst 3750-24TS)
Weight (H x W x D) 12.5 pounds (lb) (5.68 kilograms [kg]) (Cisco Catalyst 3750G-24TS)
10.0 lb (4.55 kg) (Cisco Catalyst 3750G-24T and Catalyst 3750G-12S)
9.1 lb (4.1 kg) (Cisco Catalyst 3750-48TS)
8.0 lb (3.6 kg) (Cisco Catalyst 3750-24TS)
Environmental
ranges
Operating temperature: 32˚ to 113˚ F (0˚ to 45˚ C)
Storage temperature: –13˚ to 158˚ F (–25˚ to 70˚ C)
Operating relative humidity: 10 to 85% (noncondensing)
Operating altitude: Up to 10,000 feet (ft) (3049 meters [m])
Storage altitude: Up to 15,000 ft (4573 m)
Table 2 Hardware
Description Specification