Filter
Top Products
HBR:Handshake Bulk Parameter Set Request Indicates a send request message using the pa-
rameter set image handshake mode. When the Instrument receives this action, it uses an HBS message
to return the specified parameter set.
HBS:Handshake Bulk Parameter Set Send Indicates a parameter set image send message using
handshake mode. The parameter set to be transferred is divided into multiple packets when it is greater
than a prescribed size. The packets are transferred in accordance with handshake mode.
ACK:Acknowledge Indicates a message used by the receiver during parameter set handshake mode
transfer to convey to the sender that it is ready for send of the next packet. The cat, mem, and pset
fields indicate the value carried by the last received message.
BSY:Busy Indicates a message to convey to the requester that that the Instrument cannot send back
data after a parameter set one-way mode or handshake mode send request is received. The cat, mem,
and pset fields indicate the value carried by the last received message.
RJC:Reject Indicates a message to convey to the other side that an ongoing parameter set one-way
mode or handshake mode send or receive session was interrupted. The cat, mem, and pset fields indicate
the value carried by the last received message.
EOD:End of Data Indicates a message to convey to the receiver that a one-way mode or handshake
mode serial packet transfer for sending a sub-session (one parameter set) is complete. The cat, mem,
and pset fields indicate the value carried by the last received message.
EOS:End of Session Indicates a message to convey to the receiver that a one-way mode or handshake
mode serial parameter set transfer session send, which was launched by some operation, is complete. The
cat, mem, and pset fields indicate the value carried by the last received message.
ERR:Error Indicates a message to convey to the sender that checksum or message format of the
previous packet was not correct when receiving a parameter set with handshake mode. The cat, mem,
and pset fields indicate the value carried by the last received message.
19.3.6 cat : Category
Format: 0cccccccB
The category indicates the categories of data handled by the System Exclusive Message. The ID
number (ID) of the Category is indicated on the left, while the communication operation (Action) is
indicated on the right.
24