Filter
Top Products
5
Send documentation comments to mdsfeedback-doc@cisco.com
Figure 5 Switch Ground
1
81544
Grounding
lug
System grounding pad
Wire
Screws (M4)
Grounding
pad location
Step 2 Connect the power cable to the AC power receptacle, and then plug it in (see Figure 6).
The Cisco MDS 9148 Switch supports only AC power supply. The power supply status is indicated on a front panel
LED.
The Cisco MDS 9148 Switch includes a front panel reset button that resets the switch without cycling the power.
Step 3 Power up the switch (see Figure 6).