Filter
Top Products
E-47
4. Turn on the power switch on the right side of the USB Cradle. The power LED on the
front of the USB Cradle lights red.
5. Align the terminals on the bottom of the DT-X8 with the power supply terminals in
the USB Cradle before inserting the DT-X8 (
). Push the DT-X8 fully into the USB
Cradle until the mount hooks in the cradle engage the mount holes in the DT-X8 (
).
Check that the power LED on the front of the USB Cradle lights green and that
indicator 1 on the DT-X8 lights.
To remove the DT-X8 from the USB Cradle, tilt the DT-X8 forward to disengage the
mount hooks from the mount holes and then lift the DT-X8 out of the cradle.
Status of Indicator 1 on DT-X8:
Orange: Charging the battery pack.
Red Flashing: Standby due to battery pack error or the surrounding temperature is out
of the charging temperature range.
(charging begins when the temperature is within the charging temperature
range)
Green: Charging the battery pack is complete.
Status of Indicator 2 on DT-X8:
Blue Flashing: Operating via Bluetooth
®
.
Orange Flashing: Operating via WLAN.
Magenta Flashing: Ready to communicate.