Filter
Top Products
E-20
2. Press 1(1:Deg), 2(2:Rad), or 3(3:Gra) to select
the setting you want.
•You can also use fc to select a setting and then
press E.
! Fix: All modes
This setting specifies a fixed number of digits to the right
of the decimal place. Calculation results are rounded off
to the specified number of digits before being displayed.
•Changing this setting automatically cancels any previous
settings made for @ Sci and # Norm.
• Specify the number of decimal places by inputting a value
in the range of 0 (round off and then cut fraction part) to
9 (nine decimal places).
1. Use fc to select “Fix”,
and then press E.
2. Input a value from 0 to 9 to specify the number of decimal
places.
Example: 100 ÷ 7 = 14.286 (Fix 3)
= 14.29 (Fix 2)
@ Sci:All modes
This setting specifies the number of significant digits.
Calculation results are rounded off to the specified number
of digits before being displayed.
•Changing this setting automatically cancels any previous
settings made for ! Fix and # Norm.
•You can specify anywhere from 1 significant digit (by
inputting 1) to 10 significant digits (by inputting 0).
1. Use fc to select “Sci”,
and then press E.
2. Input a value from 0 to 9 to specify the number of
significant digits.
Example: 10 ÷ 7 = 1.4286 × 10
0
(Sci 5)
= 1.429 × 10
0
(Sci 4)