Filter
Top Products
E-73
Note
•You can specify a starting date (d1) in the range of
January 1,1902 through December 30, 2097.
•You can specify an ending date (d2) in the range of
January 2,1902 through December 31, 2097.
•Input money paid out as a negative value, using the y
key to input the minus sign.
A Other Setup Items
• The initial setting of Date Mode is 365 (365-day year).
See the “Date Mode” setting under “Configuring Settings”
(page E-16).
•To display the Setup screen, press s.
A Basic BOND Mode Procedure
Example 1: To calculate the bond purchase price (PRC)
based on a specific date (Date)
1. Input the values required for the calculation from the
Setting Values table (pages E-71, E-72). Input 1, 2,
3, 5, 6, and 8 if “Date” is selected for “Bond Date”,
or 1, 4, 5, 6, and 8 if “Term” is selected for “Bond
Date”. On the setup screen, specify “365” for the “Date
Mode” setting.
• For this example, use
fc to select 1 “Set:”,
and then press E.
•Use fc to select
“Periods/Y”, and then
press E.
•Press 1 to select “Annual”.
•Use fc to select 1 “Set:”, and then press E.
•Use fc to select
“Bond Date”, and then
press E.