Filter
Top Products
E-13
Independent Memory (M)
You can add calculation results to or subtract results from independent
memory. The “M” appears on the display when there is any value other than
zero stored in independent memory.
To clear the contents of M 0 B(STO)J(M)
0
To add the result of 10 s 5 to M (Continuing) 10 5 J 50
To subtract the result of 10 + 5 from M
(Continuing) 10 5 J(M–) 15
To recall the contents of M (Continuing) BJ(M) 35
Note: Variable M is used for independent memory.
Clearing the Contents of All Memories
Ans memory, independent memory, and variable contents are retained even
if you press , change the calculation mode, or turn off the calculator.
Perform the following procedure when you want to clear the contents of
all memories.
(CLR)(Memory)(Yes)
Prime Factorization
In the COMP Mode, you can factor a positive integer up to 10 digits into
prime factors up to three digits.
To perform prime factorization on 1014
1014
4(FACT)
When you perform prime factorization on a value that includes a factor that
is prime number with more than three digits, the part that cannot be factored
will be enclosed in parentheses on the display.
To perform prime factorization on 4104676 (= 2
2
s 1013
2
)
4(FACT)
Any one of the following operations will exit prime factorization result
display.
• Pressing 4(FACT) or .
• Pressing any of the following keys: or 4.
• Using the setup menu to change the angle unit setting (Deg, Rad, Gra) or
the display digits setting (Fix, Sci, Norm).
Note: • You will not be able to execute prime factorization while a decimal
value, fraction, or negative value calculation result is displayed. Trying to
do so will cause a math error (Math ERROR). • You will not be able to
execute prime factorization while the result of a calculation that uses Pol,
Rec is displayed.
C