Filter
Top Products
11
k Decimal Point and Separator Symbols
You can use the display setup (Disp) screen to specify the
symbols you want for the decimal point and 3-digit sepa-
rator.
•To change the decimal point and separator symbol set-
COMP
Basic Calculations
ting, press the F key a number of times until you reach
the setup screen shown below.
1
Disp
fx-95MS: 1 r
Other Models: 1 r r
•Press the number key (
1 or 2) that corresponds to
the setting you want to use.
1(Dot): Period decimal point, comma separator
2(Comma): Comma decimal point, period separator
k Initializing the Calculator
•Perform the following key operation when you want to
initialize the calculation mode and setup, and clear re-
play memory and variables.
A B 3(All) =
k Arithmetic Calculations
Use the F key to enter the COMP Mode when you
want to perform basic calculations.
COMP .............................................................
F 1
• Negative values inside of calculations must be enclosed
within parentheses.
sin –1.23 →
S R D 1.23 T
•Display the selection screen.