Filter
Top Products
E-35
Attaching the 58 mm Paper Width Adjuster
Attach the 58 mm Paper Width Adjuster* inside the printer cover when using 58 mm
wide roll paper. Refer to the procedure described in “Installing the Roll Paper” for
information on opening and closing the printer cover.
1. Remove the 80 mm Paper Width
Adjuster as shown in the illustration.
Store the 80 mm Paper Width Adjuster
in a safe place after it has been
removed.
2. Press the attachments of the 58 mm
Paper Width Adjuster from the left and
right sides as shown in the illustration.
3. Insert the attachment of the 58 mm Paper
Width Adjuster into the mounting holes
inside the left side of the printer cover to
lock in position.
Important!
Always make sure to attach the 58 mm Paper Width Adjuster when using 58 mm
wide roll paper. Failure to attach the 58 mm Paper Width Adjuster may cause
the paper to jam or the printer to malfunction.
58 mm wide roll paper can only be used when the installed application is for use
with 58 mm wide paper only.
•
•
•
*Not available for IT-9000GM30E/GMC30E/GM35E.