Filter
Top Products
E-76
Status of Indicator 1 on IT-9000:
Orange: Charging the battery pack.
Red Flashing: Standby due to battery pack error or the surrounding temperature is out
of the charging temperature range.
(charging begins when the temperature is within the charging temperature
range)
Green: Charging the battery pack is complete.
Important!
Allowing the power supply terminals become wet can cause an electric shock
or fi re. In addition, if the terminals become soiled, contact may be impaired
resulting in poor charging. For reasons of safety and maintaining charging
battery pack(s) in optimum condition, clean the power supply terminals by
wiping with a dry cloth or cotton swab after disconnecting the Car Power Cable.
Never short out the power supply terminals of the Car Mounted-type Battery
Charger. This can damage the Car Mounted-type Battery Charger.
When mounting the IT-9000, securely attach to the mount hooks of the Car
Mounted-type Battery Charger and make sure that the power LED on the top of
the Car Mounted-type Battery Charger is lit in green. Charging will not proceed
properly if the IT-9000 is not mounted properly.
Regarding the installation of HA-L35CHG in your car, no technical advice
is available from CASIO. Consult with automotive parts store or specialized
store regarding the installation method and mounting strength of the products
installed in your car.
Before installing the charger in vehicle, fi rst fi nd a particular spot in the vehicle
where the Handheld Printer Terminal can receive GPS signal in good condition
while charging the battery pack using the charger.
Precaution
The Car Power Cable cigarette lighter plug may not fi t the cigarette lighter sockets of
certain 12/24V DC vehicles.
•
•
•
•
•
•