Filter
Top Products
Part-1
9
E
Part-1 QUICK START OPERATION
QUICK START OPERATION
Part-1
1. Loading Memory Protection Battery
2. Loading Paper Roll
Important
You must initialize
the Cash register.
(Figure 1)
1. Remove the printer cover.
2. Open the battery compartment cover.
3. Load 2 new UM-3, or R6P (SUM-3) type batteries into the
compartment. Be sure that the plus (+) and minus (–) ends
of each battery are facing in the directions indicated by the il-
lustrations inside the battery compartment (Figure 1).
4. Replace the memory protection battery compartment cover
back into place.
· Note:To prevent to lose all of your settings and sales data, we recommend you to install
the memory protection batteries.
· REPLACE MEMORY PROTECTION BATTERIES AT LEAST ONCE EVERY YEAR.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
To load receipt paper
!
Open platen arm.
@
Ensuring the paper is being fed from the bot-
tom of the roll, lower the roll into the space
behind the paper.
#
Put the leading end of the paper over the
printer.
$
Close the platen arm slowly until it locks
steadily.