Filter
Top Products
44
PART 3 Data Management Functions
• If you attempt to set a schedule alarm time that is already set for another data
entry, the message “ALARM TIME ALREADY USED!’’ appears on the
display. Press
ESC, J or H to display the schedule alarm to change it.
To set or change a schedule alarm for an existing data entry
1. Enter the Schedule Keeper and recall the data for which you want to set or
change a schedule alarm. Press
FUNC to display the function menu and then
press
1 to select ITEM EDIT.
2. Press
NEXT until the cursor moves to the Schedule Alarm time.
3. Input the schedule alarm time. Use the H and J cursor keys to move
between the hour and minutes setting.
• Whenever the schedule alarm setting is shown on the display, pressing
DEL
clears the alarm time and displays the prompt “ALM TIME?”. Input the alarm
time using the same procedure described above.
4. After inputting the data, press
SET to store it into memory.
• Note that the schedule alarm setting is cleared from the display when you
press
SET.
To view a data entry's current schedule alarm setting
1. Enter the Schedule Keeper and recall the date whose schedule alarm setting
you want to view.
2. Press
NEXT to switch the index display to show the schedule alarm settings
for all entries stored under the date you are viewing.
3. Use K and L to scroll through the entries and view the alarm times.
4. To clear the schedule alarm times, press
NEXT again.
To delete a specific schedule alarm
1. Enter the Schedule Keeper and recall the data for which you want to delete
the schedule alarm. Press
FUNC to display the function menu and then press
1 to select ITEM EDIT.
2. Press
NEXT (or L) until the schedule alarm time appears.
3. Press
DEL to delete the currently set schedule alarm time.
4. After deleting the alarm time, press
SET to store the entry into memory.