Casio XJ-A245 Projector User Manual


 
16
Wireless LAN Connection when Using Multiple Projectors at the
Same Time
When using two or more projectors in the same location (same meeting room, etc.), each one is
identified by a unique SSID (service set identifier) that lets each computer keep track of which
projector it is connected to.
The initial default SSID for the projector is casiolpj_default1. If there are two projectors being used at
the same time in the same location, for example, the SSID of the second projector must be changed to
casiolpj_default2 or casiolpj_default3, which are the other two available default SSIDs.
To change the default SSID of a projector
1.
Press the [INPUT] key and select “Wireless” as the input source.
This will project the Wireless standby screen.
2.
Press the [MENU] key.
3.
Use the [] key to move the highlighting to “Wireless” and then press the
[ENTER] key.
4.
Use the [] key to move the highlighting to “Change SSID” and then press the
[ENTER] key.
This displays a dialog box like the one shown below for changing the SSID.
5.
Use the [] and [] keys to move the highlighting to the SSID you want to select
and then press the [ENTER] key.
6.
To close the dialog box, press the [ESC] key.