Casio XJ-A245 Projector User Manual


 
21
To configure security settings
1.
Perform the procedure under “To log in to the projector’s System Admin page”
(page 19) to log into System Admin.
2.
Click “Setup” to display the System Admin page Setup screen.
Changing only the three settings enclosed in the boxes above are required to configure
security settings. Do not change the settings of any other items on the screen at this time.
For details about the other settings and other System Admin operations, see “System Admin
Page Operations and Settings” (page 32).
3.
Enter the SSID.
Enter any characters, up to 24 characters in total, into the “SSID” input box. However, do not
use “_default1”, “_default2”, or “_default3”, because these are already used for projector
default SSIDs.
4.
Select the security protocol.
Click the [] button to the right of the “Security” box and select the desired security protocol
from the list that appears. The following explains the meaning of each option in the list.
Security It means this:
WPA-PSK TKIP
Performs communication encryption using WPA-PSK protocol. TKIP and AES are
encryption protocols. WPA (Wi-Fi Protected Access) is a security function for
encrypting communication data. WPA uses an automatically generated encryption key
that is changed at preset intervals, which provides stronger security than WEP.
WPA-PSK AES
WPA2-PSK TKIP
Performs communication encryption using WPA2-PSK protocol. TKIP and AES are
encryption protocols. WPA2 is a new standard of WPA.
WPA2-PSK AES
WEP ASCII 64bit
Performs communication encryption using WEP protocol. ASCII 64bit, ASCII 128bit,
Hex 64bit, and Hex 128bit are formats for the WEP key character string entered in
step 5. WEP (Wired Equivalent Privacy) is a security function that uses a character
string called a “WEP key” to encrypt data and protect against unauthorized access to
wireless communications.
WEP ASCII 128bit
WEP Hex 64bit
WEP Hex 128bit
Off Turns off wireless LAN security, so communications are not encrypted.