Filter
Top Products
19
Use the Data Projector’s Viewer application to project the contents of a file on a memory device.
Viewer starts up automatically whenever you connect a memory device that is supported by the Data
Projector into the Data Projector’s USB port.
Connecting a Memory Device to the Data Projector
The Data Projector’s USB port supports connection of a FAT/FAT32 format memory device supported
by the USB interface. The following are supported memory devices.
z USB memory
z Memory cards
A commercially available USB card reader is required to connect a memory card to the Data
Projector.
z USB storage class (USB Mass Storage Class) compatible digital cameras
Important!
The Data Projector does not support connection of all commercially available USB memory
devices, memory cards, and digital cameras. For details about specific supported memory
devices, contact your original retailer or your nearest authorized CASIO dealer.
To connect USB memory to the Data Projector
Connect USB memory to the Data Projector’s USB port as shown below.
Using Viewer to Project the Contents of a File on a
Memory Device