Casio XJM245 Projector User Manual


 
33
Input Settings Main Menu
Setting Name Input Setting Unit Description
COMPUTER
Terminal
RC N
Single Use this sub-menu to specify manually the type of signal being input
from the projector’s COMPUTER IN terminal.
Auto*:
Automatically detects the signal being input from the
COMPUTER IN terminal and configures the appropriate input
protocol.
RGB:
Select this option when a computer is connected to the
COMPUTER IN terminal. For details about connecting a
computer, see “Connecting a Computer to the Projector” in the
“Setup Guide”.
Component:
Select this setting when the projector’s COMPUTER IN terminal is
connected to the component video output terminal of a video
device using a commercially available component video cable.
For information about connection, see “Connecting to a Video
Device” (page 43).
Note
The setting of this item cannot be changed while the projector
is in the 3D input mode. See “3D Input Mode” on page 10 for
information.
Video Signal /
S-Video Signal
V N
Single Use this sub-menu to specify manually the type of signal being input
from the projector’s VIDEO terminal or S-VIDEO terminal.
Auto*:
Select this setting to have the projector switch the video signal
system automatically in accordance with the input signal from the
video device that is connected to the VIDEO terminal or S-VIDEO
terminal.
NTSC / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 / SECAM:
Each setting selects the applicable video system. Use these
settings when you want to specify only one specific video signal
for the VIDEO terminal or S-VIDEO terminal.
Signal Name
Indicator
RCVHDUN
Single Use this sub-menu to specify whether or not the name of the
currently selected signal source should be displayed in the
projected image.
On*:
Select this option to turn on display of the name of the currently
selected signal source in the projected image.
Off:
Select this option to turn off display of the signal source name.
Restore Menu
Defaults
RCVHDUN
Source
Specific
Use this sub-menu to return all of the sub-menu items on the Input
Settings main menu to their initial default settings.
z Restoring menu defaults when there is no input signal will restore
defaults for the currently selected input source.
z Note that the “Signal Name Indicator” setting is always returned
to its initial default, regardless of the currently selected input
source.