Filter
Top Products
28
USB Settings Main Menu Items (USB Port Equipped
Models Only)
The USB Settings main menu is available only when there is an external device connected
to the USB port of the XJ-S38/XJ-S48/XJ-S58/XJ-S68 model projector. For details, see
“USB Function Guide” on the bundled CD-ROM.
Operational Info Main Menu
Setting Name Input
Setting
Unit
Description
Input Signal RCVUN Source
Specific
This sub-menu item shows the currently selected input
signal (RGB, Component, or VIDEO). “- - - -” is indicated
here when there is no input signal.
Signal Name RCVU Source
Specific
This sub-menu item shows the signal name of the signal
being input to the projector. For details about signal
names, see “Signal Name” under “Supported Signals” on
page 33.
Resolution R Single This sub-menu item appears only when RGB is the input
signal. It shows the number of vertical pixels of resolution
of the RGB input signal.
Horizontal
Frequency
RCV Source
Specific
This sub-menu item shows the horizontal frequency of the
input signal.
Vertical
Frequency
RCV Source
Specific
This sub-menu item shows the vertical frequency of the
input signal.
Scan System RC Source
Specific
This sub-menu item appears only when RGB or
component is the input signal, and shows the scanning
frequency of the input signal. The input signal is interlace
or non-interlace for an RGB signal input, and interlace or
progressive for a component signal input.
Lamp Time RCVUN Single This sub-menu item shows the cumulative number of
hours the current lamp has been used to date. Use this
value as a reference when deciding whether or not the
current lamp needs to be replaced. For details about
replacing the lamp, see “Replacing the Lamp” in the
“User’s Guide (Basic Operation)”.
Reset Lamp
Time
RCVUN Single Use this sub-menu item to reset the lamp time to 0
hours after replacing the lamp. For details about replacing
the lamp and the lamp time reset operation, see
“Replacing the Lamp” in the “User’s Guide (Basic
Operation)”.