Filter
Top Products
CBM-710/720/730/750 User’s Manual
20 CITIZEN
7. INPUT BUFFER BACK-UP FUNCTION
7.1 Input Buffer Back-up
If the power is turned off, or there is a power failure during printing, the data in the input buffer willbe retained.
When the power comes back on, the power failure symbol (..... PD) will be printed in red, and then the data which
was interrupted will be printed from the beginning of the line where the interruption occurred.
Note: The input buffer back-up function may not operate properly if the related capacitor is not sufficiently
charged. This may be the case if the printer has not been operated for a long period of time. After the printer
power switch has been turned on for 10 minutes, the buffer back-up should be effective for approximately
100 hours or more.
7.2 Clearing the Input Buffer
In case it is desired to delete the data in the input buffer, the power switch should be turned on while pressing
the LINE switch. When deletion of the buffer is completed the buzzer will sound. Please be sure to continue pressing
the LINE switch until that time.
If the printer fails to work properly at the time the power switch turned on, please delete the input buffer as described
above before inputting new data.