Filter
Top Products
7
1 Introduction
About DAStape
®
The DAStape provides an interconnection that is easy to install, configure, and use. It
was designed specifically for the needs of direct-attached storage (DAS). The DAStape
100 and DAStape 200 support only single-ended or LVD SCSI tape drives.
Note: Neither DAStape 100 nor DAStape 200 will support high-voltage
differential (HVD) tape drives.
The DAStape 100 supports a single Sony AIT-2 drive or Sony AIT-3 drive, and the
DAStape 200 supports a single Quantum SDLT 320 or IBM LTO-2 tape drive.
About This Guide
This guide is written for DAStape owners, and reviews DAStape installation and use.
Conventions Used
This guide uses special conventions to highlight notes, cautions, and warnings.
Note: Read Notes for additional information or suggestions about the
topic or procedure being discussed.
Caution: Read Cautions to learn ways to avoid damaging DAStape, tape
drives or other equipment.
Warning: Read Warnings to learn ways to avoid personal injury.