Filter
Top Products
Configuring the Router
3-33
Upgrading the Ethernet Card’s Firmware
You can also update the firmware for the Ethernet card inside the router. The firmware is
contained in a .bin file.
To upgrade the Ethernet card’s firmware:
1
Call Chaparral technical support for information about downloading the firmware
updates.
See Chaparral Technical Support on page 4-1
2
From the computer connected to the router, access the DOS window.
3
At the DOS prompt change to the directory where you downloaded
the .bin file.
4
Enter:
FTP [router’s IP address]
5
At the User prompt enter:
flash
6
At the Password prompt enter:
flash
7
At the FTP prompt enter:
hash
8
At the FTP prompt enter:
put [bin file name] flash
You will see the downloading progress displayed on the screen.
9
When you see the rebooting message wait 60 seconds.
❒