Filter
Top Products
Q-Wash 560Z-LED QRG
Page 2 of 8
About
This Guide
The Q-Wash 560Z-LED Quick Reference Guide (QRG) contains the
product’s connection and mounting information, as well as the menu
options and the DMX values.
Disclaimer
Refer to this product’s User Manual for detailed information and
instructions. You can download the User Manual from the
CHAUVET® website: www.chauvetpro.com.
Read ALL the disclaimers and Safety Notes in this document, as well
as those in the product’s User Manual before installing, operating, or
maintaining this product.
Safety
Notes
DO NOT open this product unless instructed. It contains no user
serviceable parts.
DO NOT look at the light source when this product is on.
DO NOT touch the product when it is operating because it may be hot.
DO NOT cover the ventilation slots when the product is operating to
avoid internal overheating.
DO NOT install or operate this product where there is less than 50 cm
to the nearest surface to allow adequate ventilation around it.
DO NOT leave any flammable material within 50 cm from this product
while operating or connected to the power outlet to minimize the risk of
fire.
DO NOT carry this product from the head. Use the handles instead.
DO NOT mount this product overhead without using a safety cable.
DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
DO NOT operate this product if you see damage on the housing, lenses,
or cables. In any of these cases, have the damaged parts replaced by an
authorized technician at once.
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to a grounded and protected circuit.
What Is
Included
One Q-Wash 560Z-LED
One IEC Power Cord with Edison Plug (US market)
One Safety Cable
Two Omega Brackets
Warranty Card
Quick Reference Guide