Filter
Top Products
Q-Wash 560Z-LED QRG
Page 3 of 8
Features
12 or 15-channel RGBWA LED moving yoke wash product
Pan: 540
Tilt: 270
RGBWA color static mixing with or without DMX control
Vector speed channel for RGBWA color mixing
Variable zoom
Variable electronic strobe
Continuously variable electronic dimmer (0~100%)
Built-in automated programs
Remote product reset and vector speed channel
255-step fully customizable program
Recall auto or custom programs via control panel or DMX
Color temperature presets (3,200~10,000 K)
AC Power
This product has an auto-ranging power supply that works with an input
voltage range of 100~240 VAC, 50/60 Hz.
Fuse
Replacement
1. Disconnect the unit from the power outlet.
2. With a flat head screwdriver, wedge the fuse holder out of the housing
and remove the blown fuse from the holder.
3. Replace the blown fuse with a fuse of the exact same type and rating.
4. Insert the fuse holder back in place and reconnect the power.
Mounting
Before mounting this product, read the Safety Notes at the beginning of this
guide and on page 2 of the product’s User Manual. Then, follow the
mounting procedure indicated in the Setup chapter of the User Manual.
Product
Mounting
Diagram
Floor Mounting
Overhead Mounting
C Clamps (not included)
Safety cable (included)
Omega brackets (included)