Filter
Top Products
Setup
ART-575W User Manual 8 2006-06-15/17:08
126
Floor mount
Clamp
Bas
e
Installation
ORIENTATION
This fixture is designed to achieve an Ingress Protection Rating of 54 only when the fixture’s base is
attached to a level horizontal surface. The ART-575W can be mounted both upright and on a truss
system.
Warning
It is important never to obstruct the fan or vents pathway.
When selecting installation location, take into consideration lamp replacement access and routine
maintenance.
Safety cables should always be used.
The fixture must have a minimum of 1 meter distance from combustible materials.
FLOOR MOUNTING
1) If connected, be sure to always disconnect from main power before installing fixture.
2) The ART-575W is constructed with mounting bracket/yoke.
3) Bolt fixture onto a leveled floor surface using floor mount holes and 3/8” diameter bolts.
TRUSS MOUNTING
The ART-575W includes 3 clamp
mounting brackets to which half-
coupler pipe clamps can be bolted.
1) Verify the structure can hold 10
times the weight of all fixtures to-be
installed.
2) Attach a minimum of two to three
clamps where illustrated.