Filter
Top Products
3. Setup 7 12/10/2010 5:16 PM
Mounting
Orientation
The DMX-4 LED may be mounted in any position, provided there is adequate room for ventilation.
Rigging
Be sure that the structure can support the weight of the fixture. Please see the “Technical
Specifications” section of this manual for a detailed weight listing. Mount the fixture securely. This
may be done with a screw, nut and bolt, or a hanging clamp. The hole in each bracket is 13 mm
in size. When rigging consider routine maintenance and control panel access. Please see the
following notes on installation.
The back plate may be reversed for an alternate rigging configuration. See the section
on the following page for details on how to do this.
Safety cables must always be used.
Mounting bracket