Filter
Top Products
3. Setup 8 12/10/2010 5:16 PM
Rigging
The DMX-4 LED ships ready to mount a standard clamp directly to the mounting bracket.
However, if you are using this product with truss or a lighting stand, then there is an alternate
rigging configuration available. This option is ideal for hanging the product without using a
hanging clamp.
Please see the steps below for further details.
1. Unplug power from the product.
2. On the back of the product, locate the six (6) Edison #2 screws.
3. Using a screwdriver, remove these.
4. The mounting bracket will now come off. Be careful not to damage the internal
components of the dimmer, as they are exposed during this step!
5. Flip the mounting bracket (back panel) around.
6. Reattach the panel by securely installing the six (6) screws.
Remove these six
(6) screws
Back Panel
Alternate Rigging
Configuration