Filter
Top Products
Operating Instructions
DMX-55 User Manual 12 2006-01-11 11:59:07
COPY SCANNER SETTINGS
This operation allows the user to copy the programming state of one scanner to another. This is
especially useful when both scanners are of the same type.
Action
1) Hold and maintain the Scanner button
to copy.
2) Tap another Scanner button to copy
settings into.
Notes
COPY SCENE
Action
1) Press the Program button until the LED
blinks.
2) Use BANK and BANK buttons to
change banks.
3) Tap the scene to copy within the bank.
4) Use BANK and BANK buttons to
change to another bank if desired.
5) Tap MIDI/Rec button.
6) Tap the SCENES button you wish to
copy the scene to.
Notes
DELETE SCENE
Action
1) Press the Program button until the LED
blinks.
2) Use BANK and BANK buttons to
change banks.
3) Tap the scene to delete.
4) Press and hold the Auto/Del button and
tap the scene button you wish to delete.
Notes
All DMX channels for the deleted scene will be set to
0.
DELETE ALL SCENES
Action
1) Power off the controller.
2) Press and hold the Program and BANK
buttons while turning the power back
on.
Notes
COPY BANK
Action
1) Press the Program button until the LED
blinks.
2) Use
BANK and BANK buttons to
select the bank to copy.
Notes