Filter
Top Products
Scorpion™ GVC/RVM/RGY User Manual (Rev. 02k) Page 11 of 26
3.
S
ETUP
AC Power
This product has an auto-ranging power supply and it can work with an input voltage
range of 100~240 VAC, 50/60 Hz.
To determine the power requirements for a particular fixture, see the label affixed to
the back plate of the fixture or refer to the fixture’s specifications chart. A fixture’s
listed current rating indicates its average current draw under normal conditions.
Always connect this product to a protected circuit (circuit breaker or fuse),
making sure that it has
an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Power Linking
This fixture provides power linking via the Edison outlet located in the back of the unit.
Please see the diagram below for further explanation.
Power Linking
Diagram
You can power link up to 14 Scorpion™ GVC/RVM/RGY fixtures on 120 VAC or
up to 28 Scorpion™ GVC/RVM/RGY fixtures on 230 VAC.
The power linking diagram shown above corresponds to the North American
version of this product ONLY! If using this product in other markets, you must
consult with the local CHAUVET® distributor, as power linking connectors and
requirements may differ in your country or region.
1
st
Fixture
2
nd
Fixture
3
rd
Fixture
To other
fixtures