Filter
Top Products
Scorpion™ GVC/RVM/RGY User Manual (Rev. 02k) Page 13 of 26
Proper Usage
This fixture is for overhead mounting only. For safety purposes, CHAUVET®
recommends mounting your lighting effect fixtures on steady elevated platforms or
sturdy overhead supports using suitable hanging clamps. In all cases, you must use
safety cables.
You can obtain appropriate mounting hardware from your lighting
vendor.
International laser safety regulations require that laser fixtures must be operated in
the fashion illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation
between the floor and the lowest laser light vertically. Additionally, 3 meters of
horizontal separation is required between laser light and audience or other public
spaces.
CAUTION: USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF
PROCEDURES OTHER THAN WHAT IS SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE