Filter
Top Products
3-4
Cisco IOS Dial Services Quick Configuration Guide
Chapter 3 Configuring the Cisco 1604 Router
Verifying Host Name, Password, and Time Stamp Configuration
To configure the host name, password and timestamps for the Cisco 1604, enter the following
commands beginning in user EXEC mode:
Step 1 Enter privileged EXEC mode.
Router> enable
Step 2 Enter global configuration mode.
Router# configure terminal
Enter configuration commands, one per line. End
with CNTL/Z.
Step 3 Assign a host name to the router. This host name is typically used during authentication with the central
site.
Router(config)# hostname robo-austin
Step 4 Enter a secret enable password that secures privileged EXEC mode. Be sure to change “guessme” to
your own secret password.
robo-austin(config)# enable secret guessme
Step 5 Encrypt passwords in the configuration file for greater security.
hq-sanjose(config)# service password-encryption
Step 6 Enable millisecond time stamping on debug and logging output. Time stamps are useful for detailed
access tracing.
hq-sanjose(config)# service timestamps debug datetime msec
hq-sanjose(config)# service timestamps log datetime msec
Verifying Host Name, Password, and Time Stamp Configuration
To verify configuration of the Cisco 1604’s host name, password, and time stamps:
Step 1 Enter the show running command:
robo-austin# show running
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname robo-austin
!
enable secret 5 $1$og7B$nSwMZM0NBKTPhV09KVgxl1
!
interface Ethernet0
no ip address
shutdown
!