Filter
Top Products
Configuring the Cisco 2524 and Cisco 2525 Routers 4-9
Configuring the Router
Step 7 Enter the enable and virtual terminal passwords:
Enter enable password: shovel
Enter virtual terminal password: vterm1
Step 8 Press Return to accept Simple Network Management Protocol (SNMP)
management, or enter no to refuse it:
Configure SNMP Network Management? [yes]: no
Step 9 In the following example, the router is configured for AppleTalk, IP, and IPX.
Configure the appropriate protocols for your router:
Configure Vines? [no]:
Configure LAT? [no]:
Configure AppleTalk? [no]: yes
Multizone networks? [no]: yes
Configure DECnet? [no]:
Configure IP? [yes]:
Configure IGRP routing? [yes]:
Your IGRP autonomous system number [1]: 15
Configure CLNS? [no]:
Configure bridging? [no]:
Configure IPX? [no]: yes
Configure XNS? [no]:
Configure Apollo? [no]:
Step 10 Enter the ISDN BRI switch type for the router. The ISDN switch type appropriate
for the router depends on the ISDN provider’s equipment. Table 4-1 lists the ISDN
switch types.
Enter ISDN BRI Switch Type [none]: basic-5ess