Filter
Top Products
Cabling and Configuring the 25 Mbps Port Adaptor Modules 9-5
Connecting the Interface Cables and Checking the LEDs
25-Mbps PAM Network Connections and LEDs
The 25-Mbps PAMs provide an interface to ATM end workstations for transmitting and
receiving data at up to 25.6 Mbps bidirectionally. The PAM LEDs provide status
information for the port adapter module’s individual interface connections. (See
Figure 9-3.)
Figure 9-3 25-Mbps PAM UTP Connections and LEDs
ATM Network Connections
Connect the ATM interface cables as shown in Figure 9-3. For detailed descriptions of
ATM cabling requirements, refer to the sections “Preparing Network Connections” and
“ATM Connection Equipment” in the chapter “Preparing for Installation.”
The ATM PAMs provide an interface to ATM switching fabrics for transmitting and
receiving data at up to 25 Mbps bidirectionally over 12 interfaces.
H8800
ATM25-4PORT
3
2
1
0
96-pin Molex connector