Filter
Top Products
5
Center-Mount Bracket Installation Guide for Cisco 3640 Routers
78-11336-01
Required Tools and Equipment
Required Tools and Equipment
You need the following tools and equipment to install the center-mount brackets:
• Number 2 Phillips screwdriver
• Screws for rack mounting
Attaching the Center-Mount Brackets to the Chassis
You can use the center mount brackets to install the Cisco 3640 chassis with either the front panel or the
rear panel facing forward. The bracket orientation and attachment holes used are different for
front-facing and rear-facing installations.
Complete the applicable procedure below, depending on the required chassis orientation in the rack.
Front-Panel Forward Installation
Attach one bracket to each side of the Cisco 3640 chassis as shown in Figure 1.
• Position the angled end of the bracket flush with the rear of the chassis.
• Insert the four screws at the rear into the bracket holes numbered “1.”
• Insert the two screws at the front into the two lined-up holes.
Figure 1 Bracket Attachment with Front Panel Facing Forward
35761
0
ACTIVE
R
EADY
123
PCMCIA
1
0
The second bracket attaches to the other side of the chassis.
Use holes numbered 1 for front-panel forward.
1
1
2
2