6
Center-Mount Bracket Installation Guide for Cisco 3640 Routers
78-11336-01
Attaching the Center-Mount Brackets to the Chassis
Rear-Panel Forward Installation
Attach one bracket to each side of the Cisco 3640 chassis as shown in Figure 2.
• Position the angled end of the bracket toward the front of the chassis, flush with the back of the
bezel.
• Insert the four screws at the front into the bracket holes numbered “2.”
• Insert the two screws at the rear into the two lined-up holes.
Figure 2 Bracket Attachment with Rear Panel Facing Forward
AUI
EN
W
O
BRI
S/T
35762
1
1
2
2
The second bracket attaches to the other side of the chassis.
Use holes numbered 2 for rear-panel forward.