Cisco Systems 3660 Network Router User Manual


 
1
Cisco Systems, Inc.
All rights reserved.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Cisco Systems, Inc.
Corporate Headquarters
Copyright © 1999
Text Part Number:
Replacing the Cisco 3660 Router
Backplane
Product Number: CISCO3660-Backplane=, CISCO3660-Backplane-CO=
This document describes how to replace the system backplane in Cisco 3660 routers.
Use this document in conjunction with the Cisco 3600 Series Hardware Installation Guide, Software
Configuration Guide for Cisco 3600 Series and Cisco 2600 Series Routers, and the Regulatory
Compliance and Safety Information document for your router. If you have questions or need help,
refer to the section “Cisco Connection Online” later in this document.
This document contains the following sections:
Safety Recommendations, page 1
Tools and Equipment Needed, page 5
Removing the Cisco 3660 Backplane, page 5
Replacing the Cisco 3660 Backplane, page 13
Replacing Connections to the Router, page 17
Cisco Connection Online, page 17
Documentation CD-ROM, page 18
Safety Recommendations
Follow these guidelines to ensure general safety:
Keep the area clear and dust-free during and after installation.
Keep tools away from walk areas where you or others could fall over them.
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll
up your sleeves.
Wear safety glasses when working under any conditions that might be hazardous to your eyes.
Do not perform any action that creates a potential hazard to people or makes equipment unsafe.
78-6633-01